YPB Self-Priming Oil Rotary Vane Pump

YPB Self-Priming Oil Rotary Vane Pump
YPB vane pump, vane pump, its working principle is sliding vane in a slot in the rotor and rotor eccentricity on pump body, rotor turns, sliding vane sliding out inside the rotor, close to the sliding surface of the pump body, rotor, vane, pump body cavity is formed by the rotation of the rotor, the dimensional size of periodic change, cavity increases, breathing in medium, cavity become hour, discharge medium, the cycle, complete medium conveying process.
1 Characteristics:
(1), Strong self-priming capacity for suction of the underground tank, hoisting height of 4.5 m.
(2), High efficiency in sliding vane pump, mechanical thrust by centrifugal force and liquid pressure of joint action, close to the stator curve movement, so that the pump has a unique efficiency.
(3), The performance unchanged since the adjustable vane vane sliding out from the rotor slot, updating wear and tear, and does not degrade the performance of the pump. The gear pump have substaintial distinction.
(4), Conveying liquid capacity hydraulic vane shear sensitivity of the design of highly efficient by sliding vane pump to drive the fluid shear and churn, avoids the resulting changes in fluid properties.
(5), Reliable sealing, according to the characteristic of viscous, high temperature medium, the use of special structure of the mechanical seal, have the characteristics of safe, durable and reliable.
(6), Maintenance is simple and convenient to open the pump cover, and put forward the old vane, insert the new sliding vane. Just a few minutes, your pump can be back to work. Daily check as easily.
(7), Security sensitive pressure pump set in the safety relief valve, the export system is suddenly closed, the export amount of pressure rise less than 0. 15 mpa, which ensure the safety of the system and pump on one hand, on the other hand, but the load of motor
2 Overview:
(1), YPB series vane pump, vane pump, oil pump is a positive displacement pump.
(2), YPB series vane pump is mainly used for conveying medium viscosity 10 ~ 200 mm2s lubricating oil, is suitable for conveying various properties similar chemical products, the medium temperature of 0  to 120 C, this series of pumps are self-priming ability.
(3), Used for conveying medium viscosity 10 ~ 20000 mm2s lubricating oil, crude oil, chemical industry, food slurry liquid, is suitable for conveying various properties similar media. The medium temperature 0  ~ 200 C, this series of pumps are self-priming ability.
3  Advantages

YPB series self-priming rotary vane pump, the built-in relief valve, with the blade rotor drive liquid. In the light of the nodular cast iron with self-lubricating material of blade. Because of its good performance, can transmit viscosity and volatile liquid, compared with the same pump power is lower. In the transmission of low speed heavy traffic. Fast, low noise, use for a long time; Vane structure make it reliable and trouble-free service.
YPB vane pump has more advantages and strong self-priming capacity, long life, small volume, high efficiency. In transport gasoline, diesel or similar media, under the condition of vane pump has the very big advantage, is a self-priming centrifugal pump and substitute for copper wheel gear pump.
4 Scope of application:

Oil tank truck, ship fuel, lubricating oil, jet fuel, oil, chemicals, gasoline, diesel oil, biological fuel, solvents etc
5 Installation and use:

This pump is widely used in mobile or fixed device. When cooperate with universal coupling or hydraulic motor, this pump can be installed on any oil tanker, can also be connected to the motor or diesel engine, according to the metal on the floor, used in any large flow or flow immersible pump-based fuelling equipment. Is the copper wheel gear pump replacement.